Part Number Hot Search : 
FS7KM12 C1004 106M16 FQA30N40 VAL1Z LC82210L LLZ10 5KE22
Product Description
Full Text Search
 

To Download 2SA1734 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 2SA1734T2G
Preferred Device
PNP Silicon Transistor
The device is housed in the SOT-89 package, which is designed for medium power surface mount applications. * High Current: 1.2 Amp * Available in 7 inch/1000 unit Tape and Reel * Device Marking: SA
MAXIMUM RATINGS (TC = 25C unless otherwise noted)
Rating Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current Total Power Dissipation @ TA = 25C Derate above 25C Symbol VCEO VCBO VEBO IC PD (Note 1) (Note 2) Operating and Storage Temperature Range TJ, Tstg Value -30 -40 -6 -1.2 1.56 13 0.67 5.0 -65 to 150 Unit Vdc Vdc Vdc Adc COLLECTOR 2 Watts mW/C Watts mW/C C EMITTER 3 Symbol RqJA (Note 1) (Note 2) TL 260 10 Max 60 190
1
http://onsemi.com
MEDIUM POWER PNP SILICON HIGH CURRENT TRANSISTOR SURFACE MOUNT
BASE 1
THERMAL CHARACTERISTICS
Characteristic Thermal Resistance Junction-to-Ambient (surface mounted) Maximum Temperature for Soldering Purposes Time in Solder Bath 1. FR-4 @ 1.0 X 1.0 inch Pad 2.0 oz. Cu PCB 2. FR-4 @ Minimum Pad Unit C/W
MARKING DIAGRAM
YM
2 3
C Sec
SA Y = Year Code M = Month Code SA = Device Code
SOT-89 CASE 1213 STYLE 2
ORDERING INFORMATION
Device 2SA1734T2G Package SOT-89 Shipping 1000/Tape & Reel
Preferred devices are recommended choices for future use and best overall value.
(c) Semiconductor Components Industries, LLC, 2003
1
August, 2003 - Rev. 0
Publication Order Number: 2SA1734T2G/D
2SA1734T2G
ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted)
Characteristic OFF CHARACTERISTICS Collector -Emitter Breakdown Voltage (Note 3) (IC = -10 mAdc, IB = 0) Collector Cutoff Current (VCB = -40 Vdc, IE = 0) Emitter Cutoff Current (VEB = -6.0 V, IC = 0) ON CHARACTERISTICS (Note 3) DC Current Gain (IC = -100 mA, VCE = -2.0 V) (IC = -1.0 A, VCE = -2.0 V) Collector -Emitter Saturation Voltage (IC = -700 mA, IB = -35 mA) Base -Emitter Saturation Voltage (IC = -700 mA, IB = -35 mA) SMALL-SIGNAL CHARACTERISTICS Current -Gain - Bandwidth Product (Note 4) (IC = -100 mAdc, VCE = -2.0 Vdc, f = 100 MHz) Collector Output Capacitance (VCB = -10 Vdc, IE = 0 mAdc, f = 1.0 MHz) 3. Pulse Test: Pulse Width 300 ms, Duty Cycle = 2.0%. 4. fT is defined as the frequency at which |hfe| extrapolates to unity. fT COB - - 100 16 - - MHz pF hFE 120 40 VCE(sat) - VBE(sat) - - - -0.5 -1.2 Vdc - - 400 - Vdc - V(BR)CEO -30 ICBO - IEBO - - -0.1 - -0.1 mAdc - - mAdc Vdc Symbol Min Typ Max Unit
http://onsemi.com
2
2SA1734T2G
250 225 hFE , DC CURRENT GAIN 200 150 125 100 75 50 25 0 -10 -20 -50 -100 -200 -500 -1.0 A -2.0 A -4.0 A IC, COLLECTOR CURRENT (mA) -55 C 25C V, VOLTAGE (VOLTS) 175 TJ = 125C -2.0 VCE = -2.0 V -1.8 -1.6 -1.4 -1.2 -1.0 -0.8 -0.6 -0.4 -0.2 0 -50 -100 VCE(sat) @ IC/IB = 10 -200 -500 -1.0 A IC, COLLECTOR CURRENT (mA) -2.0 A -4.0 A VBE(sat) @ IC/IB = 10 VBE(on) @ VCE = 2.0 V
Figure 1. Typical DC Current Gain
Figure 2. On Voltages
VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS)
-1.0 -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 IC = -10 mA IC = -500 mA IC = -100 mA -50 -100 -200 -500 IC = -2.0 A TJ = 25C
-10 -4.0 -2.0 -1.0 -0.5 -0.2 -0.1 -0.05 -0.02 -0.01 -1.0 TA = 25C TC = 25C 1.0 ms
0 -0.05 -0.1 -0.2 -0.5 -1.0 -2.0 -5.0 -10 -20 IB, BASE CURRENT (mA)
WIRE LIMIT THERMAL LIMIT SECOND BREAKDOWN LIMIT -2.0 -5.0 -10 -20 -50 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) -100
Figure 3. Collector Saturation Region
Figure 4. Safe Operating Area
http://onsemi.com
3
2SA1734T2G
PACKAGE DIMENSIONS
SOT-89 (3-LEAD) CASE 1213-02 ISSUE C
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS 3. 1213-01 OBSOLETE, NEW STANDARD 1213-02. MILLIMETERS MIN MAX 4.40 4.60 2.40 2.60 1.40 1.60 0.37 0.57 0.32 0.52 1.50 1.83 1.50 BSC 3.00 BSC 0.30 0.50 0.80 --- --- 4.25 INCHES MIN MAX 0.173 0.181 0.094 0.102 0.055 0.063 0.015 0.022 0.013 0.020 0.059 0.072 0.059 BSC 0.118 BSC 0.012 0.020 0.031 --- --- 0.167
-A- F
C J
L K D
-B-
0.10 E G H
2 PL
M
TB TB
S
A A
S
-T-
SEATING PLANE
DIM A B C D E F G H J K L
0.10
M
S
S
STYLE 2: PIN 1. BASE 2. COLLECTOR 3. EMITTER
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada JAPAN: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative.
http://onsemi.com
4
2SA1734T2G/D
This datasheet has been download from: www..com Datasheets for electronics components.


▲Up To Search▲   

 
Price & Availability of 2SA1734

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X